When installing the door, the first thing you need to do is to measure the height and width of the opening. Although the altitude is not an important factor in the case of interior doors, you have to be very careful when measuring for your entry. For width, you need to keep in mind that it will be different in the middle, bottom, and top.
After the measurement is complete you will need to remove the old hinges, in the case of re-installation. Now install the new hinge leaf in your frame. You can use a chainsaw to cut this fixture according to the required width. If you are finding the best window and door companies then you can visit https://www.smarttechwindows.ca/
Image Source: Google
When installing doors, also remember to put some shims on your floor beneath the fixture. In the opening only one hinge leaf will be attached to the frame. Make sure that the hinge barrel facing you. Slide shims in placed on the floor with your legs.
This should be done when lifting the fixture so as to get you the necessary gap at the top. You also need to put another shim at the top to hold the gap in place. These shims are encouraged to push aside rather than pushing them directly as a small distance. You will have to repeat the same process on the side of your entrance door latch. Once you've put your equipment in the right location, mark the bottom and top hinges with a pencil.